EM3100RSDTM
100 A 4 modules, Modbus RS485 double tariff MID 3 phase + N multimesurement direct energy meter
Sold individually, in packs of 1
Other MID model available in 3 phase + N
Description
Installed upstream of an electrical circuit, energy meters are used to identify and monitor an installation’s electricity consumption.
Our wide range of products can be used for metering and measuring directly connected single-phase, three-phase or four-phase circuits of up to 100 A and up to 6000 A when connected via current transformers.
The EM3100RSDTM meter is an energy meter operating on a Tri+N network with Modbus RS485 communication and two pulse outputs. All the parameters of the electrical network can be read directly on the meter or sent to a BMS. This energy meter connected with current transformers measures from 5 to 6000 A. It also has terminals for metering two different tariffs (T1 and T2).
Caractéristiques techniques
Reactive energy: class 1.5 according to IEC 62053 - 23
MID-certified product
The MID directive (Measurement Instruments Directive, abbreviated to M.I.D) is a European directive concerning measuring instruments. Only electricity meters that comply with this directive may be used for billing electricity.
This directive guarantees the accuracy of measurements by establishing uniform rules throughout the European Union. This is a guarantee of the accuracy and reliability of our meter range.
Dual tariff
Dual tariff energy meters have two terminals (7 and 8) that can be used to switch from one tariff to the other. If there is no voltage on these two terminals, the meter is on tariff T1. When a 230 V voltage is present on these terminals, the meter switches to tariff 2.
A multi-measurement meter
Our range of Modbus RS485 communicating meters can undertake a complete analysis of your network.
As well as active energy, the meter also displays voltage, current, active and reactive power, power factor and frequency.
Compact products
Aware that space is a key factor in the design of your cabinets, we have developed a compact range. Our 100 A four-phase meter is only 72 mm wide, i.e. 4 modules.
Secure meter
Our meters are supplied with terminal covers to prevent any risk of electric shock. These terminal covers can also be sealed to prevent fraud.
Produits associés
EM3100PURS
100 A 4 modules, Modbus RS485 direct 3 phase + N multimesurement direct energy meter
3 Other models available in 3 phase models
EM145PURSM
40 A 1 module Modbus RS485 MID multimesurement direct single phase energy meter
1 Other MID model available in single-phase
SPCM10075X33
SPCM10 75 A/333 mV Ø10 mm 3 m cable compact split core CT
3 Other sizes available
EM35TCPURS
5 A CT 4 modules Modbus RS485 multimesurement 3 phase + N energy meter
3 Other models available in 3 phase models
TAC032250X05
TAC032 250/5 Ø23 cable 32 x 10 bar CT
9 Other sizes available
MFM-NAUTIL920
96 x 96 via CT Mobdus RS485, pulse output multifonction meter NAUTIL920
2 Other models available
Energy measurement and management