2.5 à 35 mm² 1000 V for Cu / Al cable grey L1, L2, L3, N, PE power terminal block • VC05-0012

This product has been added to the quote request!

Validate my request

Home

Assembly and cabling

Power terminal blocks

2.5 à 35 mm² 1000 V for Cu / Al cable grey L1, L2, L3, N, PE power terminal block

VC05-0012

2.5 à 35 mm² 1000 V for Cu / Al cable grey L1, L2, L3, N, PE power terminal block

Sold individually, in packs of 16

This product has been added to the quote request!

Validate my request

Description

Terminal blocks provide the electrical connection between two flexible or rigid conductors. They can be used to connect several conductors at a single connection point or to supply power to an electrical cabinet.

Our tinned aluminium terminal blocks are compatible with aluminium and copper cables. Thanks to their compact format, these products fit neatly into a small footprint. They are easily installed on a DIN rail using a clip.

Our self-extinguishing terminals meet the UL94-V0 standard, have UL approval and are IP 20 certified.

Technical characteristics

Manufacturer

Ouneva

Cable core

Aluminium and/or copper

Number of cables

1 Al/Cu cable per phase L1, L2, L3, N, PE

Conductor (mm²)

2.5 to 35 mm²

Rated current

Copper 135 A / Aluminium 120 A (according to IEC standard)

Operating voltage

1000 Vac / 1500 Vdc

Usage frequency

50 Hz

Ipk intensity

7 kA

Tightening torque

3 N.m. (2.5 - 16 mm²)
6 N.m. (25 - 35 mm²)

Tightening (BTR/Allen)

4 mm

Precautions for use

For copper cables: up to 3 copper cables (same diameter) can be connected in an output without exceeding the maximum diameter
For aluminium cables: only one cable can be connected per output; we recommend using Penetrox type grease.
For flexible cables: it is essential to use terminators ferrule

Height

40 mm

Width

79 mm

Length

65 mm

Weight

123 g

Colour

Gris

Materials

Casing and cover: halogen-free PA66-V0 plastic
Connector body: tinned aluminium

Operating temperature

-10°C to +80°C

Storage temperature

-10°C to +50°C

Protection class

IP20

Standards

IEC 61238-1, IEC 60947-7-1, UL 1059

Packaging

10 units

Minimum order

1 unit

An aluminium and copper terminal

While most terminals on the market only accept aluminium or copper conductors, we have terminals that accept both materials. Designed in tinned aluminium, our terminal blocks accommodate both incoming and outgoing aluminium and copper cables.

1 =

One terminal terminal for 3 phases, neutral and earth

This model is particularly compact compared to a solution with one terminal block per phase.

2 =

Easily identify your phases

Thanks to the 4 notches on the front of the product, it’s extremely easy to add markers to distinguish your phases. We recommend using 5 mm Partex type labels.

3 =

Quickly view tightening torque

The tightening torque recommended by the manufacturer is marked on the front of the terminal. This information guarantees that the product will be installed in compliance with safety standards.

The visible tightening torque also enables you to conduct your annual tightening campaigns easily and with peace of mind.