VC05-0037
35 to 240 mm² 1000 V for 2 Cu / Al cables grey power terminal block
Sold individually, in packs of 12
Other colours available
Description
Terminal blocks provide the electrical connection between two flexible or rigid conductors. They can be used to connect several conductors at a single connection point or to supply power to an electrical cabinet.
Our tinned aluminium terminal blocks are compatible with aluminium and copper cables. Available in 3 colours (grey, blue, green/yellow), you will be able to distinguish between your various phases at a glance.
Thanks to their compact format, these products fit neatly into a small footprint. They are easily installed on a DIN rail using a clip.
Our self-extinguishing terminals meet the UL94-V0 standard, have UL approval and are IP 20 certified.
Technical characteristics
40 N.m (150 - 240 mm²)
For aluminium cables: only one cable can be connected per output; we recommend using Penetrox type grease.
For flexible cables: it is essential to use ferrule
Connector body: tinned aluminium
An aluminium and copper terminal
While most terminals on the market only accept aluminium or copper conductors, we have terminals that accept both materials. Designed in tinned aluminium, our terminal blocks accommodate both incoming and outgoing aluminium and copper cables.
Connecting several cables per phase
The double junction block enables you to connect two aluminium cables from the site and end up with a single cable inside your cabinet.
For example, on a VC05-0042 terminal, two 6 to 95 mm² aluminium or copper cables are used. Output is via 1 or 2 x 6 to 95 mm² cables.
Wide connection range
Our terminal block has a very wide connection range. This is to facilitate the input and output of cables of different conductor (mm²).
Quickly view tightening torque
The tightening torque recommended by the manufacturer is marked on the front of the terminal. This information guarantees that the product will be installed in compliance with safety standards.
The visible tightening torque also enables you to conduct your annual tightening campaigns easily and with peace of mind.
Easily identify your phases
Thanks to the 4 notches on the front of the product, it’s extremely easy to add markers to distinguish your phases. We recommend using 5 mm Partex type labels.
Secure installation with terminal covers
The terminal cover is an insulating accessory. It is used to protect the user against direct contact with power circuit connections.
Associated products
OD02-0551
IP2X cover for power block 240 mm²
5 Other sizes available
VC05-0034
35 to 240 mm² 1000 V for Cu / Al cable grey power terminal block
2 Other colours available
VC05-0381
95 to 300 mm² 1000 V for 3 Cu / Al cables grey power terminal block
VC05-0362
35 to 240 mm² 1000 V for Cu / Al for cable PEN power terminal block
3 Other sizes available
Assembly and cabling