EM35TCRSDTM
5 A CT 4 modules Modbus RS485 double tariff MID multimesurement 3 phase + N energy meter
Sold individually, in packs of 1
Other MID model available in 3 phase + N
Description
Installed upstream of an electrical circuit, energy meters are used to identify and monitor an installation’s electricity consumption.
Our wide range of products can be used for metering and measuring directly connected single-phase, three-phase or four-phase circuits of up to 100 A and up to 6000 A when connected via current transformers.
The EM35TCRSDTM meter is an energy meter operating on a Tri+N network with Modbus RS485 communication and two pulse outputs. All the parameters of the electrical network can be read directly on the meter or sent to a BMS. This energy meter connected with current transformers measures from 5 to 6000 A. It also has terminals for metering two different tariffs (T1 and T2).
This product is MID certified.
Technical characteristics
Reactive energy: Class 1.5 according to IEC 62053 - 23
MID-certified product
The MID directive (Measurement Instruments Directive, abbreviated to M.I.D) is a European directive concerning measuring instruments. Only electricity meters that comply with this directive may be used for billing electricity.
This directive guarantees the accuracy of measurements by establishing uniform rules throughout the European Union. This is a guarantee of the accuracy and reliability of our meter range.
Dual tariff
Dual tariff energy meters have two terminals (7 and 8) that can be used to switch from one tariff to the other. If there is no voltage on these two terminals, the meter is on tariff T1. When a 230 V voltage is present on these terminals, the meter switches to tariff 2.
A multi-measurement meter
Our range of Modbus RS485 communicating meters can undertake a complete analysis of your network.
As well as active energy, the meter also displays voltage, current, active and reactive power, power factor and frequency.
Compact products
Aware that space is a key factor in the design of your cabinets, we have developed a compact range. Our 100 A four-phase meter is only 72 mm wide, i.e. 4 modules.
Secure meter
Our meters are supplied with terminal covers to prevent any risk of electric shock. These terminal covers can also be sealed to prevent fraud.
Easy wiring of existing installations
The BACS (Building Automation and Control System) requires all commercial buildings to be fitted with a BMS if they have a heating or air-conditioning system of more than 70 kW.
Our range of open CT or Rogowski loop meters makes it easy to add metering points to your electrical installation with minimum downtime. There’s no need to de-cable the existing installation, just wrap the cable around the CT or loop.
What’s more, our network expert can offer you a support service for uploading information to a web page.
Associated products
EM140PURSM
Compteur d'énergie multimesure mono direct 40 A 1 module, Modbus RS485 MID
1 Autre modèle MID disponible en monophasé
SPCM10075X33
TC compact ouvrable SPCM10 75 A/333 mV Ø10 mm câble 3 m
3 Autres calibres disponibles
EM35TCPURS
Compteur d'énergie multimesure Tri + N TC 5 A 4 modules, Modbus RS485
3 Autres modèles disponibles en triphasé
TAC032250X05
TC TAC032 250/5 câble Ø23 barre 32 x 10
9 Autres calibres disponibles
MFM-NAUTIL920
Centrale de mesure NAUTIL920 96 x 96 Modbus RS485, impulsion sur TC
2 Autres modèles disponibles
Energy measurement and management