5 A CT 4 modules Modbus RS485 MID multimesurement 3 phase + N energy meter • EM35TCPURSM

This product has been added to the quote request!

Validate my request

Home

Energy measurement and management

Energy meters

5 A CT 4 modules Modbus RS485 MID multimesurement 3 phase + N energy meter

EM35TCPURSM

5 A CT 4 modules Modbus RS485 MID multimesurement 3 phase + N energy meter

Sold individually, in packs of 1

This product has been added to the quote request!

Validate my request

Other MID model available in 3 phase

100 A

Description

Installed upstream of an electrical circuit, energy meters are used to identify and monitor an installation’s electricity consumption.

Our wide range of products can be used for metering and measuring directly connected single-phase, three-phase or four-phase circuits of up to 100 A and up to 6000 A when connected via current transformers.

The EM35TCPURSM meter is an electrical measuring device operating on a tri-phase and four-phase network with RS485 Modbus communication and two pulse outputs. It has been designed to be able to read all the electrical parameters on the meter display. the Modbus communication allow also to monitoring all the electrical parameters on a PLC or BMS. This current transformer (CT)-connected meter provides metering from 5 to 6000 A.

This product is MID certified.

Technical characteristics

Network

3 phase or 3 phase + N (3 phase on request)

Certification

MID via SGS

Rated current

On primary 5A CT, 6000 A max

Maximum current

20 x In for 0.5s (IEC 62053-21)

Starting current

10 mA x CT ratio (example for CT 200 / 5A I start= 400 mA)

Nominal voltage

400 Vac (-20% to +20%)

Frequency

50/60 Hz

Consumption

< 10 VA per phase

Measures

Active and reactive energy, voltage, current, active, reactive and apparent power, power factor, frequency, harmonic distortion rate

Precision

Active energy: class B according to EN50470-3, class 1 according to IEC 62053-21
Reactive energy: class 1.5 according to IEC 62053-23

Metrological LED

Flashes according to pulse 3200 imp / kWh

Screen

Backlit LCD, 8 digits

Output

Pulse and RS485 Modbus

Typical pulse output

Optocoupler 5 to 27 Vdc

Pulse weight

3200 pulses / kWh and adjustable to 0.01 / 0.1 / 1 / 10 / 100 kWh

Pulse duration

Adjustable to 60 / 100 or 200 ms

Maximum Vce voltage

27 Vdc

Maximum short-circuit current

27 mA

Typical Modbus output

Two-wire RS485, RTU mode

Communication speed

38400 baud max

Parity, stop bit

Even, odd or none; 1 or 2

Transmission distance

15 metres maximum for pulses, 1200 metres and 32 slaves for the bus

Data retention

Non-volatile memory (> 20 years)

Connection of phase and neutral terminals

2.5 mm², torque 0.5 N.m

Connection of comm. terminals

1 mm², torque 0.25 N.m

Mounting

DIN rail

Precautions for use

Note that the CT ratio can only be set and saved once. Be sure to respect the current direction.Fit the sealable terminal covers after connecting the product

Height

94.5 mm

Width

72 mm (4 modules)

Depth

65 mm

Weight

287 g

Colour

Grey

Materials

Self-extinguishing ABS polymer

Operating temperature

-20°C to +50°C, humidity 0 to 95% non-condensing

Storage temperature

-25°C to +55°C, humidity 0 to 95% non-condensing

Protection class

IP51 front panel

Standards

IEC 62053-21, IEC 62053-23, MID

Packaging

1 unit

Minimum order

1 unit

MID-certified product

The MID directive (Measurement Instruments Directive, abbreviated to M.I.D)

is a European directive concerning measuring instruments. Only electricity meters that comply with this directive may be used for billing electricity.

This directive guarantees the accuracy of measurements by establishing uniform rules throughout the European Union. This is a guarantee of the accuracy and reliability of our meter range.

1 =

The same product, whatever the type of communication required

The EM35TCPUPURSM is fitted as standard with two pulse outputs and one Modbus RTU communication.

2 =

A multi-measurement meter

Our range of Modbus RS485 communicating meters can undertake a complete analysis of your network.

As well as active energy, the meter also displays voltage, current, active and reactive power, power factor and frequency.

1 2 3

Associated products

EM140PURSM

40 A 1 module Modbus RS485 MID multimesurement direct single phase energy meter

1 Other MID model available in single-phase

SPCM10075X33

SPCM10 75 A/333 mV Ø10 mm 3 m cable compact split core CT

3 Other sizes available

EM35TCPURS

5 A CT 4 modules Modbus RS485 multimesurement 3 phase + N energy meter

3 Other models available in 3 phase models

TAC032250X05

TAC032 250/5 Ø23 cable 32 x 10 bar CT

9 Other sizes available

Energy measurement and management

All our solutions for measuring consumption, monitoring and tracking the energy performance of electrical installations.

See the products

5 A CT 4 modules Modbus RS485 MID multimesurement 3 phase + N energy meter

MID-certified product

The same product, whatever the type of communication required

A multi-measurement meter

Associated products

40 A 1 module Modbus RS485 MID multimesurement direct single phase energy meter

SPCM10 75 A/333 mV Ø10 mm 3 m cable compact split core CT

5 A CT 4 modules Modbus RS485 multimesurement 3 phase + N energy meter

TAC032 250/5 Ø23 cable 32 x 10 bar CT

Thank you

An error has occurred