6 to 95 mm² and 1 bar 24 x 1 x 3 1000 V for 2 Cu / Al cables grey power terminal block • VC05-0387

This product has been added to the quote request!

Validate my request

Home

Assembly and cabling

Power terminal blocks

6 to 95 mm² and 1 bar 24 x 1 x 3 1000 V for 2 Cu / Al cables grey power terminal block

VC05-0387

6 to 95 mm² and 1 bar 24 x 1 x 3 1000 V for 2 Cu / Al cables grey power terminal block

Sold individually, in packs of 15

This product has been added to the quote request!

Validate my request

Description

Terminal blocks provide the electrical connection between two flexible or rigid conductors. They can be used to connect several conductors at a single connection point or to supply power to an electrical cabinet.

Our tinned aluminium terminal blocks are compatible with aluminium and copper cables. Thanks to their compact format, these products fit neatly into a small footprint. They are easily installed on a DIN rail using a clip.

Our self-extinguishing terminals meet the UL94-V0 standard, have UL approval and are IP 20 certified.

This model is particularly suitable for connection in the electrical panel with an insulated flexible busbar or a copper busbar.

Technical characteristics

Manufacturer

Ouneva

Cable core

Aluminium and/or copper

Number of cables

2Al/Cu cables

Conductor (mm²)

6 to 95 mm² and 1 bar 24 x 1 x 3

Rated current

Copper 245 A / Aluminium 220 A (according to IEC standard)

Operating voltage

1000 Vac / 1500 Vdc

Usage frequency

50 Hz

Ipk intensity

59.8 kA

Tightening torque

12 N.m (6 - 25 mm²)
22 N.m (35 - 95m²)
8 Nm (24 x 1 x 3)

Tightening (BTR/Allen)

6 mm

Mounting

DIN rail or plate

Precautions for use

For copper cables: up to 3 copper cables (same diameter) can be connected in an output without exceeding the maximum diameter
For aluminium cables: only one cable can be connected per output; we recommend using Penetrox type grease.
For flexible cables: it is essential to use terminators ferrule

Height

51 mm

Width

42 mm

Length

84 mm (fixing 72 mm centre on back plate)

Weight

121 g

Colour

Grey

Materials

Casing and cover: halogen-free PA66-V0 plastic
Connector body: tinned aluminium

Operating temperature

-10°C to +80°C

Storage temperature

-10°C to +50°C

Protection class

IP20

Standards

IEC 61238-1, IEC 60947-7-1
This product is not UL certify

Packaging

1 unit

Minimum order

1 unit

An aluminium and copper terminal

While most terminals on the market only accept aluminium or copper conductors, we have terminals that accept both materials. Designed in tinned aluminium, our terminal blocks accommodate both incoming and outgoing aluminium and copper cables.

1 =

Connect several cables per phase

This power terminal block can be used to connect a large cross-section aluminium cable to a smaller cross-section copper cable.

The triple power terminal block can also be used to connect an input with an aluminium or copper cable from the jobsite. It can also be used to connect from 2 to 5 aluminium or copper cables to other enclosures or panels.

2 =

Quickly view tightening torque

The tightening torque recommended by the manufacturer is marked on the front of the terminal. This information guarantees that the product will be installed in compliance with safety standards.

The visible tightening torque also enables you to conduct your annual tightening campaigns easily and with peace of mind.