7 x 10 mm² outputs and 3 x 16 mm² outputs 627 A 8.8 class screws narrow busbar connector

Our product has been approved by the Laboratoire Central des Industries Electriques – LCIE (private electricity technical testing centre) in accordance with the 2004 NF EN 60998-2-1 standard for “Connection devices for low-voltage circuits”.

These tests guarantee the quality and reliability of the product (strength, quality of screws, heating).

This “narrow” 20-mm wide conductor has been developed to for use specifically with your 20 x 5 mm busbars and bigger. Its size ensures that the spacing between phases is respected to avoid short circuits.

With its 100 mm centre distance and oblong mounting, the connector can be used with the most commonly used copper bars: threaded or perforated. This product is also compatible with solid bars.

The connector is an ideal product when the installation has a small footprint or when the number of connections needs to be increased. The C10D2 product allows 10 connections over a length of 120 mm instead of 225 mm on a perforated bar with a 25 mm pitch.

This connector saves users a great deal of time, as it replaces the need to install cable lugs. Instead, the connector is fixed in place with just two screws.

The cables are connected using hexagonal socket head cap screws. Tightened  is performed using an L-shaped Allen key rather than a conventional screwdriver, making it easier to access the tool in cramped environments.

Our products are designed with class 8.8 steel screws, which provide maximum strength and optimum conductivity. This classification ensures the quality and hardness of our screws.